For International orders, please email email@example.com or call us at 1(585)-593-3169 Monday - Friday 8am - 5pm EST.
Imported 0-100 psi pressure gauge with syphon threaded for 3/16-40.
Pressure Gauge Dia: 3/4"
Pressure Range: 0-100 psi
Syphon (PGS-2) Thread: 3/16-40
These safety valves use a stainless steel ball and spring in a brass body. They are set to blow at approximately 60psi. Threaded 5/16-27 Female (1/16 NPT).
Plain water gauge without drain or stop cocks, suitable for small boilers. Mounts 2-3/8" nominally center-to-center. All brass, with 3/16 OD glass tube. Threaded 1/4-40, comes with boiler bushings. Drain valve can be installed on bottom.
This tank is for use with our boiler feed pump and our BLR-1 or BLR-2.
3-1/8" OD x 4" high copper tank with copper tank end.
Kit includes one cast aluminum base, tank, tank end, and one 1/4-40 threaded bushing for outlet.
Extra end available for...
A small hand-operated, piston-type hydraulic pump used to replenish boiler water while boiler is in use and under pressure. Also used to hydrostatically test your boiler and other hydraulic applications. These pumps have been known to produce up to 400...
Completely machined fittings kit for connecting Vertical Boiler #1 to a Boiler Feed Pump (BFP-1). Includes pipe fittings only. Note: this kit is included in Boiler #1 Fittings Kit. Click here to view a typical boiler #1 piping arrangement...
NEW! Larger size steam whistle valve in 1/8" NPT thread. Valve only, add your own whistle. Designed with the live steam railroader in mind. Click for information on model pipe threads.
Completely machined fittings kit for connecting Horizontal Boiler #2 to a Model #1 Steam Engine. Includes pipe fittings only - for matching fittings kit see Boiler #2 Nipple Kit. Also requires 1/4" globe valve (GV4), displacement lubricator (LUB-1), and...
Completely machined fittings kit for connecting Vertical Boiler #1 to a Boiler Feed Pump (BFP-1), Water Tank (WTK-1), and a Model #2, 3, or 5 Steam Engine. Includes pipe fittings only - for matching nipple kit see Boiler #1 Nipple Kit. Also requires 1/4"...
1/8" copper rivets, 1/4" long, for use in boiler model construction. Contains 50 rivets per pack.
1 ounce of 4% silver-tin alloy solder and flux. Excellent on copper, brass, bronze, and stainless steel. Melting point 430°F. This is the solder we provide in our model boiler kits.
Esbit dry fuel tablets can be used as a heat source to run boilers and solar engines. Chose from 4 or 14 gram tablet packs