Machine Tools

  • Brick Siding

    Brick Siding

    1/12 scale common joint brick sheeting gives an authentic look to your model engine display base or machine shop building. Each brick is 1/4" wide x 11/16" long x 1/8" high. Made from styrene plastic. Choose from brick sheets or corners. Brick Sheets -...

    $12.00 - $22.00
    Choose Options
  • Red Oak Flooring

    Red Oak Flooring

    Made of genuine wood veneer which has been laminated to a special paper to ensure easy staining, varnishing, and installation. One sheet per package. Covers 187 sq. inches. Size: 11" x 17"  

    Add to Cart
  • Working Door & Window

    Working Door & Window

    Traditional Working Doors & Windows. Door Size: 2-31/32" Wide x 7-3/16" High (Fits opening 3" wide x 7" high x 3/8" deep) Window Size: 2-31/32" Wide x 5-5/16" High (Fits opening 2-9/16" wide x 5-1/16" high x 1/2" deep)  

    $12.00 - $13.00
    Choose Options
  • Drill Press Kit

    Drill Press Kit

    1/12 SCALE WORKING MODEL 1890s DRILL PRESS That's right! You can actually drill holes with this baby! This little darling was scaled down to 1/12 scale from the J.E. Snyder Company, 21 upright drill press as found in illustration #450 on page 116 of the...

    Add to Cart
  • Line Shaft

    Line Shaft

    This line shaft material is 3/16" diameter cold rolled steel. Great for running in hangers and attaching pulleys to power your machine tools. Comes in 1' foot lengths.  

    Choose Options
  • Belting


    Flat belting is 0.018" thick and is available in 1/4" and 1/2" widths. Ideal for transmitting the engine's power to the dynamo, line shafts, or anything you wish to power. It is recommended to allow a little extra material when ordering. We recommend you...

    $3.50 - $5.50
    Choose Options
  • Line Shaft Belt Pulley

    Line Shaft Belt Pulley

    These belt pulleys are ideal for transmitting the engines power to the machine shop tools. Ready to machine aluminum castings. Available in 1-3/4" dia. x 5/8" wide & 1" dia. x 1/4" wide. Kit comes with set screw and detail drawing. NOTE: Casting kit...

    $4.50 - $8.00
    Choose Options
  • Line shaft hanger for transmitting the engine's power to the machine shop tools.

    Line Shaft Hanger

    Line shaft hanger for transmitting the engine's power to the machine shop tools. This kit (shown machined here) comes with everything you need to machine your own line shaft hanger. Includes a cast aluminum hanger bracket, bar stock, screws, and working...

    Add to Cart
  • A Strelinger #781 Reed Foot Lathe

    Wood Lathe Kit

    1/12 SCALE WORKING MODEL 1890s WOOD LATHE No engine. No power plant. No problem! In the 1890s, foot power was all that was needed to drive the Chas. A Strelinger #781 Reed Foot Lathe. Of course, ours is 1/12 the size. As always, you can hook it up to...

    Add to Cart